Air Pumps
Pyramid-shaped corundum diffusion stone in a sandblasted 304 stainless steel U-shaped body.
Fine, steady bubble stream encourages circulation and surface movement to support gas exchange.
Choose Small (20 mm) or Large (30 mm) diffusion head to suit your layout and air pump.
Supplied with 1.5 m airline tubing, check valve, T-connector and suction cup (air pump sold separately).
£ 13.99 – £ 15.99Price range: £ 13.99 through £ 15.99 (incl. VAT)
- EUR: 19.96€ - 22.81€
Overview
COMPACT DESIGN. FINE-BUBBLE AERATION.
LGND Pyramid™ Air Stone combines a distinctive pyramid-shaped diffusion surface with a compact U-shaped stainless steel body. Designed for ornamental aquariums, it delivers a steady stream of fine air bubbles while keeping the installation discreet.
The high-temperature-sintered corundum diffusion stone distributes air through its porous surface. Rising bubbles encourage circulation and surface movement, supporting gas exchange between the aquarium water and the surrounding air.
The 304 stainless steel housing features a sandblasted finish and an integrated curved inlet. A suction-cup mount secures Pyramid™ to the aquarium glass, keeping the diffusion surface elevated above the substrate.
Airflow can be adjusted through a compatible air pump, such as the LGND Aeris Mains Series, or a separate airline control valve. Lower airflow produces a gentler bubble stream, while increased airflow provides stronger water movement. Bubble size and distribution depend on pump performance, installation depth and the condition of the stone.
Available in two nominal sizes, 20 mm and 30 mm, Pyramid™ offers a compact aeration solution for a variety of aquarium layouts.
Directions

1. Prepare the Air Stone
Rinse Pyramid™ thoroughly with clean fresh water before first use. Submerge it to wet the porous stone before starting the air supply.
Do not use soap or household detergents.
2. Connect the Airline
Connect aquarium airline tubing with a 4 mm internal diameter to the inlet. Standard 4/6 mm airline tubing is suitable.
Support the metal inlet while fitting the tubing. Push it on gently without applying pressure to the diffusion stone.
3. Install the Check Valve
Fit the supplied check valve into the airline outside the aquarium. Its flow-direction arrow must point from the air pump towards Pyramid™.
Follow the air pump manufacturer’s instructions for pump placement and protection against water flowing backwards.
4. Position Inside the Aquarium
Attach the suction cup to clean aquarium glass. Position Pyramid™ with the diffusion surface facing upwards and sufficient clearance above the substrate.
Keep the stone clear of plants, decorations and other obstructions. Choose a position where bubbles can rise freely to the surface.
5. Start and Adjust
Switch on a suitable aquarium air pump and adjust the airflow gradually. Use the pump’s output control or a compatible airline control valve if required.
Allow the stone to become thoroughly wetted before assessing bubble distribution. Avoid excessive turbulence and never completely obstruct the pump outlet.
Technical Specification


Dimensions are nominal. Select the air pump according to its airflow and pressure performance at the intended installation depth.
What’s Included

- LGND Pyramid™ Air Stone in the selected size
- 1.5 m airline tubing
- One check valve
- One airline T-connector
- One suction cup with retaining clip
Air pump sold separately.
Cleaning
Algae, biofilm and mineral deposits can gradually restrict the diffusion surface. Inspect Pyramid™ regularly and clean it when bubble output decreases or becomes uneven.
- Switch off the air pump before removing the air stone.
- Release the suction cup gently and disconnect the airline while supporting the inlet.
- Rinse with clean fresh water.
- Gently brush surface deposits away using a soft brush. Do not scrape or puncture the porous stone.
- For persistent mineral deposits, use an aquarium-equipment descaler confirmed as compatible with corundum, stainless steel and any seals or bonding materials. Follow the cleaner’s dilution and soaking instructions.
- Rinse thoroughly and soak in clean fresh water before reinstalling.
The supplier suggests cleaning approximately every 3–6 months, but more frequent cleaning may be needed depending on algae growth and water conditions.
Do not boil the air stone or attempt to remove the diffusion head from its housing.
FAQ
What does LGND Pyramid™ do?
A: Pyramid™ disperses air from an aquarium air pump into bubbles. The rising bubbles encourage circulation and surface agitation, helping gas exchange. The air stone does not generate oxygen itself.
Which size should I choose?
A: The 20 mm model offers a smaller diffusion head for discreet placement. The 30 mm model provides a larger diffusion surface.
Choose according to available space, desired water movement and pump performance. Aquarium volume alone does not determine the correct size.
Does it require a powerful air pump?
A: The pump must provide enough pressure to overcome the water depth and resistance of the porous stone. A pump’s wattage alone does not establish compatibility.
If output is weak, check the airline, check-valve direction and stone cleanliness before increasing the airflow.
Can I adjust the bubble output?
A: Yes. Adjust a compatible air pump’s output or use a separate airline control valve. Bubble size may change with airflow; very low output may produce bubbles from only part of the surface.
Is Pyramid™ silent?
A: The air stone has no motor or moving parts, but the pump, rising bubbles and surface movement can produce sound. Noise depends on the complete installation and airflow setting.
Why are bubbles coming from only one area?
A: The stone may not yet be fully wetted, airflow may be insufficient, or deposits may be restricting some pores. Allow it to saturate, check the air supply and clean it if necessary.
Can I use it in a planted aquarium with CO₂ injection?
A: Yes, although increased surface agitation can encourage dissolved CO₂ to escape. Adjust aeration timing and intensity to suit the aquarium’s oxygen requirements and CO₂ routine.
Can I connect it to a pressurised CO₂ system?
A: Pyramid™ is intended for aquarium aeration using an air pump. Do not connect it to pressurised CO₂ equipment unless compatibility has been specifically confirmed.
Safety
- For ornamental aquarium aeration only.
- Keep the product, small accessories and packaging away from children. Plastic packaging presents a suffocation hazard.
- Handle the porous stone carefully. Do not drop, strike, scrape or squeeze it.
- Do not use a unit with a cracked stone, loose diffusion head or damaged inlet.
- Use only with a suitable aquarium air pump.
- Install the check valve in the correct direction. A T-connector does not provide backflow protection.
- Keep the air pump dry and outside the aquarium, following its installation instructions.
- Keep electrical connections dry and provide drip loops on aquarium equipment cables.
- Do not completely block the airline or restrict airflow beyond the pump manufacturer’s permitted limits.
- Keep the diffusion surface clear of substrate and other obstructions.
- Monitor fish and shrimp after adjusting airflow and avoid excessive water movement.
- Use cleaning products only outside the aquarium. Never mix cleaning chemicals.
- Rinse thoroughly after cleaning before returning the air stone to the aquarium.
- Aeration does not replace filtration, appropriate stocking or regular aquarium maintenance.
